Kayak Racks

Yakima's Low Rider Towers are specifically designed to fit raised factory roof rack railings. These may be the easiest towers on the planet to install and remove. Simply twist the tightening lever to fasten your Roundbars to the towers and the towers to your raised factory railings. Fits a broad range of factory installed raised side rails including smaller European rails and oversized rails. Locks are recommended but not included with this rack.

Yakima's 38" Fairing creates a low profile front wind deflector for your roof-top rack. Specifically made for Yakima's Roundbar, fairings help reduce wind noise created by the roof rack and increase the efficiency of your vehicle.

Yakima's 58" Roundbars are constructed with galvanized steel and a polyethylene coating. The maximum capacity for a pair of Yakima Roundbars is 165 pounds. Approved load limits for your vehicle may be considerably less depending on the make and model of your vehicle.

Thule's complete 400xt Aero Rack is Thule's answer to attaching a sport rack to a gutterless vehicle. This complete rack includes 3 components: 400xt Aero foot Pack, 2 load bars and a Thule Fit Kit (specific to your vehicle). The Aero foot sits on a rubber pad which rests on the roof of your vehicle. Load bars slide through the Aero foot. The Fit Kit attaches the components to the roof. Thule's recommended load bar length will be provided unless otherwise specified. Thule's complete 400xt Aero Rack is Thule's answer to attaching a sport rack to a gutterless vehicle. This complete rack includes 3 components: 400xt Aero foot Pack, 2 load bars and a Thule Fit Kit (specific to your vehicle). The Aero foot sits on a rubber pad which rests on the roof of your vehicle. Load bars slide through the Aero foot. The Fit Kit attaches the components to the roof. Thule's recommended load bar length will be provided unless otherwise specified.

Thule's 450 Crossroad Foot Pack attaches to vehicles with raised factory railings.

Yakima's Control Towers offer the ultimate in convenience for vehicles with roof track systems. The low-profile, aerodynamic, multi-sport system carries a full load of gear and accessories. Its snap-fit design provides an easy-to-use, solid, secure fit to your vehicle.

Yakima's 48" Roundbars are constructed with galvanized steel and a polyethylene coating. The maximum capacity for a pair of Yakima Roundbars is 165 pounds. Approved load limits for your vehicle may be considerably less depending on the make and model of your vehicle.

Yakima's Landshark saddles are economically designed for the vast number of recreational kayaks. Sold in sets of four.

Yakima's Low Rider Complete Roof Rack is specifically designed to fit raised factory roof rack railings. This may be the easiest rack on the planet to install and remove. Simply twist the tightening lever to fasten the Roundbars to the towers and the towers to your raised factory railings. Fits a broad range of factory installed raised side rails including smaller European rails and oversized rails. Locks are recommended but not included with this rack. Yakima's recommended Roundbar length will be supplied unless otherwise specified. Longer Roundbar lengths are available upon request. Yakima's Low Rider Complete Roof Rack rack is specifically designed to fit raised factory roof rack railings. This may be the easiest rack on the planet to install and remove. Simply twist the tightening lever to fasten the Roundbars to the towers and the towers to your raised factory railings. Fits a broad range of factory installed raised side rails including smaller European rails and oversized rails. Locks are recommended but not included with this rack. Yakima's recommended Roundbar length will be supplied unless otherwise specified.

The Riverside® cartop kayak carrier kit offers a durable and easily portable option for getting your kayak to the water. The mini-cell foam blocks are waterproof and designed to retain their shape, elasticity and functionality. The kit includes 2 blocks, 1 utility strap, 2 tie-down ropes, 2 block straps, and 4 bumper hooks.

Thule 830 The Stacker: With Quick Draw straps. The most effecient way to carry multiple whitewater kayaks. The new 830 Stacker replaces the 520 Kayak Stacker. Four boat maximum capacity. Tying boats down is now easier than ever with the upper bridge design. Easy carrier transfer from vehicle to vehicle with proven universal hardware. For a clean look when not in use, The Stacker folds down flat. Includes one pair ratcheting tie downs, two straps and buckle protectors. Fits Thule bars, Yakima® bars, and most factory installed racks.

Firmly holds kayak with custom designed saddle that conforms to hull. Maximum kayak protection with integrated rubber pad. Virtually eliminate hot spots with large contact surface area. Fits Thule standard and Xsporter load bars, Yakima, and most factory installed cross bars. Installs in minutes. Complete carrier for one boat includes four saddles, all mounting hardware, and heavy-duty straps. Additional safety provided by bow and stern tie downs.

Yakima's Landing Pads anchor Control Towers to your factory mounting points. Landing Pads are vehicle specific (actual Landing Pad for your vehicle may differ in appearance from pad shown).

Yakima's Mako saddles are designed to securely carry any type of kayak. When Mako's integrated tiedown straps are tightened, the soft plastic cradle forms to snugly and securely fit and hold your kayak. Mako's innovative strapping system allows you to easily remove the tiedown straps when not in use.

Thule's 450 Crossroad Rack attaches to vehicles with raised factory railings. The complete rack consists of 2 components: 450 Railing Foot pack and Load bars. Thule's recommended load bar length will be provided unless otherwise specified.

Yakima's Landing Pads anchor Control Towers to your factory rack system. Landing Pads are vehicle specific (actual Landing Pad for your vehicle may differ in appearance from pad shown).

No description

Yakima's Landing Pads anchor Control Towers to your factory rack system. Landing Pads are vehicle specific (actual Landing Pad for your vehicle may differ in appearance from pad shown).

Factory crossbar adaptable using Mighty Mounts (sold separately). The Yakima Hull Raiser kayak racks are a great alternative to saddles. It uses a specially engineered J-cradle design that accepts any kayak and supports it from the stiff, side area. Frees up space for attaching other gear carriers. Hullraiser connects directly to both Thule square and Yakima round bars on a multi-purpose base rack system. Also attaches to many factory racks using Yakima Might Mounts. Sold as a pair.

Yakima's Hully Roller's unique design allows you to roll your kayak on and off your vehicle with ease. The pivoting, rubber padded rollers adjust to any hull shape. Once your kayak is positioned, the rollers lock in place to prevent kayak movement. Hully Rollers function best on station wagons, vans or SUVs due to the rear loading requirement. (sedan trunks make it difficult to load from the rear)

Yakima's 60" Tracks are designed for specific vehicles capable of supporting a permanently installed track system. The installer should be aware that drilling and sealing is required for the correct, leak-proof installation. Silicone sealant is included.

Yakima Q-Clips are specifically designed for Q-Towers. Q-Clips are packaged and sold in pairs. Vehicle specific fit directions and two rubber base pads are included. Two packages (4 clips) are required. Clips are powder coated stainless steel and fit your car's door frame like a glove.

The Rack Warehouse now sells Yakima's gutterless rack systems in one bar units. Rack will come with roundbar size that is specified for your vehicle. Please note on order form if you need a longer bar. A great combination with the Fulton hitch mounted canoe carrier. Package includes:

Upgrade your Load Warrior or Mega Warrior with the Locking Bracket from Yakima.

The SteelHead has proven to be one of the toughest and most secure bike rack attachments available. Made of a durable, stainless steel, the fork mount secures the front fork while the shaped wheel tray accommodates all wheel sizes. The SteelHead skewer locks your bike to the attachment and the attachment to the rack.

How do you put a rack in the bed of a truck without scratching the bed rails or drilling? The Beddy Jo was designed to rest in the bed of your truck and secure to the tailgate. The padded mounting bar keeps the bikes low in the bed. Bikes are fork mounted. This rack can carry any type of bicycle on any type of truck.

Thule's 440 Subaru Specialty Carrier is designed specifically for Subaru vehicles. This railing carrier with interchangeable custom SR kits (sold separately) ensures a perfect fit on Subaru vehicles with enclosed rails. SR Kit required (see below). Integrated handle ensures fast installation to vehicle side rails. No tools are required for installation. Lock cores are sold separately (see below).

Fit Kits are designed to fasten Thule Aero foot racks to your gutterless vehicle. Fits kit are available in hundreds of shapes and sizes to fit just about any gutterless vehicle.

Thule's tb60 Bolt-on Top Tracks mount permanently to the roofs of camper shells and caps.

The Yakima Dry Dock boat hitch rack creates a stable loading platform on the back of vehicles with 2" receiver hitches. Yakima water sport accessories can easily be added for additional TLC and hull stability. Please select the crossbar size that best fits your carrying needs. A one bar roof system is recommended for the front of your vehicle.

The Hitch Mount Canoe Carrier mounts through your step bumper ball hole or directly through your tow hitch ball hole. This carrier is height adjustable to fit the needs of any vehicle with a step bumper or trailer hitch. The top bar swivels to make one person loading and unloading easy and quick. If you need to tow a trailer, simply add the off-center adapter plate (included).

Yakima's Landing Pads anchor Control Towers to your factory rack system. Landing Pads are vehicle specific (actual Landing Pad for your vehicle may differ in appearance from pad shown).